Shop

Shop

Hofmann

Monty 3650

For wheels type                              Road

Rim diameter no extensions          16″ – 22.5″

Clamping axial orientation              horizontal

Chuck speed                                  1

Bead breaker type                          Roller + Roller / Tool

Mounting tool type                          Roller / Tool

Demounting tool type                     Roller / Tool

Tools tangential to the rim              No

Tool left/right travel                         Manual 2 positions, chuck adjustable

Tool rotation                                   Manual w/ pin

Tool positioning                              Manual

Hydraulic pump flow                      3

Hydraulic pressure                        160 bar

Integrated wheel lift                       No

Hydraulic motor                             0.75 kW

Chuck motor                                  0.75 kW

Power supply                                 230 VAC 1Ph 50/60 Hz

Max footprint dimensions              1270 x 1290 x 1100 mm

Net weight lbs                                728 lbs

Hofmann Monty 3650

Access ramp for easy loading of the tire changer, two rollers for bead breaking and tire changing allow quick operation, easy control via integrated control console, clamping of wheel by its center bore via cone and wing nut.

​

Part Number:  

M3650230

​

Access ramp for easy loading of the tire changer

Two rollers for bead breaking and tire changing allow quick operation. Both the inner and outer beads are demounted in a single process.

The innovative design of monty 3650 ensures that the rollers are always centered relative to the wheel.

​

Wheels, rollers and control console are so positioned relative to each other to make retreading of tires extremely convenient.

Easy control via integrated control console

Clamping of wheel by its center bore via cone and wing nut

Monty 8600

Max. Rim Diameter                   12″-30″

Max. Tire Width                         15″ (380mm)

Max. Wheel Diameter               47″ (1200 mm)

Wheel Lift Capacity                   154 lbs (70kg)

Standard Power Supply            230V 1Ph 50/60Hz 16A

Air Pressure Required              110-140 PSI

Footprint (W x D x H)                70″ x 89″ x 59″

Shipping Weight                       1047 lbs (475 kg)

​

​

Hofmann Monty 8600

The dual-disc bead breaker, center clamp system and automatic demounting tool make the monty® 8600 the most productive tire changer solution on the market.

Leverless demounting and powered wheel lift reduce technician fatigue and opportunity for injury. Dual disc bead breakers and servo positioned and electronically synchronized so the technician can efficiently maintain a safe and ergonomic bay position.

​

Part Number:  

EEWH742AHNA

​

Wheel Lift 

Reduces fatigue and the chance for injury presented by handling heavy tires and rims

Wheel Center Pilot Hole Clamping 

Center piloting eliminates rim edge damage and provides positive center hold clamping using a cone and quick nut

Laser Positioned Tooling 

Precise rim edge positioning prevents damage to the wheel or tire due to misaligned tool

Ergonomic Dual Bead Breakers 

Easily positioned upper bead breaker and servo driven lower bead breaker. Lower bead breaker is automatically positioned via the upper bead breaker position

Leverless Demount Head 

Integrated demounting finger gently pulls the bead over the rim edge, reducing the possibility of tire or wheel damage

Bead Assist 

Follows the rotation to position the bead in the wheel’s drop center on difficult, stiff side wall, tires

Integrated Tire Inflation System 

Quick and safe top side bead seating and inflation included

Storage Compartment 

Easy access for tools and accessories

Quick Fit Center Wheel Clamping 

Center wheel clamping provides easy and precise wheel mounting while avoiding damage

Monty 8100 S

Max Tire Diameter                         44″ (112 cm)

Max Tire Width                              15″ (38 cm)

Max Rim Width                              14″ (36 cm)

Reverse Rim Clearance                15″ (38 cm)

Mounting Head Range                  12″-30″ (30.5-76cm)

Wheel Lift                                      Yes

Capability                                      154 lbs (70 Kg)

Operated By                                  Foot Switch

Power Supply                                230V 1Ph 50/60Hz 17A

Installed Motor Power                   1 Hp 0.9 kW

Maximum Air Pressure Allowed    174 PSI (12 BAR)

Maximum Air Pressure Required  116 PSI (8 BAR)

​

Hofmann Monty 8100 S

The monty® 8100s center post tire changer is designed for easy use with minimal training of technicians reducing shop overhead and adding to your bottom line. Traditional center post design coupled with Hofmann’s innovative feature set makes this tire changer highly productive and reduces the risk of wheel damage.

​

Part Number:  

EEWH768AC

​

Swing Arm Style Mount/Demount

Traditional mounting head with tire lever

Quick change design, non-marring plastic and metal mount/demount tools included

Bead Pusher/Tire Lifting Tool

Integrated bead pusher assists in the mount/demount process of the upper bead

Tire lifting tool aids the technician with the demounting process

Hand Activated Bead Breaker

Side mounted bead breaker

Thumb switch activation at the point of use

Center Post Clamp Design

Reduces risk of wheel damage

Accommodates a wider range of wheel sizes

smartSpeed

Rotational speed maximized by automatic inverter control

Variable from 7 RPM to 20 RPM offering the highest possible speed for maximum productivity

Integrated Wheel Lift

Assists technicians with lifting and positioning heavy tires/wheels on the machine

Integrated roller board eases bead breaking

Monty 3550 SS

Overall Wheel Clamping Diameter   12″-28″ (30.5 -71 cm)

Inner Wheel Clamping Diameter      12″-28″ (30.5-71 cm)

Outer Wheel Clamping Diameter      12″-26″ (30.5-66 cm)

Bead Breaker Range Position One   2.5″-12″ (6-30.5 cm)

Bead Breaker Range Position Two   6″-17″ (15-43 cm)

Bead Loosening Power                     6,000 lbs (2,722 kg)

Shipping Weight                                975 lbs (442 Kg)

Single Speed Power Requirements  120V 1Ph 60Hz

smartSpeed Power Requirements    230V 1Ph 16A 60Hz

smartSpeed Revolution Speed         7/14 CW & 7 CCW

​

Hofmann Monty 3550 SmartSpeed

Hofmann’s monty® 3550 series of high-performance tire changers feature the industry’s most advanced capabilities to service a wide variety of wheel and tire assemblies. The monty 3550 series is specifically designed to change low-profile, high performance and run-flat tires maximizing a shop’s versatility.

​

Part Number:  

EEWH747B

​

Patented smartSpeed™ Technology

Automatically minimizes damage to tires

Innovative, patented technology that optimizes the torque applied to the wheel and automatically sets the maximum rotation speed of the wheel

​

Variable from 7 RPM to 18 RPM offering the highest possible speed for maximum productivity

​​

Accommodates Large Wheel & Tire Assemblies 

Allowing for a tire diameter of 47″ and an outer-wheel diameter of 26″ on the monty 3550 (30″ on monty 3550em,) the monty 3550/3550em can handle wheel and tire assemblies found on cars and light trucks

Dual Wheel Clamping Cylinders 

Dual pneumatic clamping cylinders control all four clamping jaws, eliminating damage to wheel due to slippage

Four-Jaw Clamping Chuck 

Self-centering and clamps wheel with either 28″ inner or 26″ outer diameter

Powerful Two-Position Bead Breaker 

6,000 lbs of power at the bead shovel and a range of up to 17″ wide. The two-stage pneumatic cylinder provides precise power and can be toggled with the foot pedal as needed

Pneumatically-Controlled Mount/Demount Head 

Push-button controlled mount/demount head pneumatically lowers and locks into position, automatically indexing away from the wheel to prevent contact and damage to the wheel and tire assembly

Protect the Most Delicate Wheels 

All metal parts have plastic protection providing non-metal to metal contact when changing delicate wheels

Monty 3550

Clamping range                                12″ – 28″

Outside clamping range                   12″ – 26″

Inside clamping range                      12″ – 28″

Capability                                          70 kg

Power supply                                    115 VAC 1Ph 50/60 Hz

Dimensions LxWxH                          75.6″ x 67.7″ x 89″

Weight                                               975 lbs

​

Hofmann Monty 3550

Hofmann’s monty® 3550 series of high-performance tire changers feature the industry’s most advanced capabilities to service a wide variety of wheel and tire assemblies. The monty 3550 series is specifically designed to change low-profile, high performance and run-flat tires maximizing a shop’s versatility.

​

Part Number:  

EEWH747A

​​

Accommodates Large Wheel & Tire Assemblies 

Allowing for a tire diameter of 47″ and an outer-wheel diameter of 26″ on the monty 3550 (30″ on monty 3550em,) the monty 3550/3550em can handle wheel and tire assemblies found on cars and light trucks

Dual Wheel Clamping Cylinders 

Dual pneumatic clamping cylinders control all four clamping jaws, eliminating damage to wheel due to slippage

Four-Jaw Clamping Chuck 

Self-centering and clamps wheel with either 28″ inner or 26″ outer diameter

Powerful Two-Position Bead Breaker 

6,000 lbs of power at the bead shovel and a range of up to 17″ wide. The two-stage pneumatic cylinder provides precise power and can be toggled with the foot pedal as needed

Pneumatically-Controlled Mount/Demount Head 

Push-button controlled mount/demount head pneumatically lowers and locks into position, automatically indexing away from the wheel to prevent contact and damage to the wheel and tire assembly

Protect the Most Delicate Wheels 

All metal parts have plastic protection providing non-metal to metal contact when changing delicate wheels

​

Two-Speed Capability (EEWH747A) 

7 RPM for delicate and difficult activities, 14 RPM for speed

Monty 3300

Overall Wheel Clamping Diameter   10″-24″ (25-61 cm)

Inner Wheel Clamping Diameter      12″-24″ (30.5 – 61 cm)

Outer Wheel Clamping Diameter     10″-24″ (25-61 cm)

Bead Breaker Range                        2″-17″ (5-43 cm)

Bead Loosening Power                    6,000 lbs (2,722 kg)

Max Outer Tire Diameter                  40″ (101.6 cm)

Shipping Weight (monty3300em)     855 lbs (387.8 kg)

Shipping Weight (monty3300)          625 (283.5 cm)

Power Requirements                        120V 1Ph 60Hz

​

Hofmann Monty 3300

The Hofmann® monty® 3300 and 3300em high-performance tire changers are designed for high-volume tire shops, multi-bay repair shops and car dealerships. Technicians can effortlessly & safely change standard tires or the most difficult performance tires (low-profile and run flat tires) on cars, SUVs and light trucks. The monty 3300 series feature a powerful, multi-position bead breaker that delivers 6,000 lbs of power at the bead shovel, making easy jobs of both the stiffest and softest sidewalls.

​

Part Number:  

M3300110EM

​​

Accommodates Large Wheel & Tire Accessories 

Allowing for a tire diameter of 40″ and an outer-wheel diameter of 24″ on the monty 3300/3300em can handle wheel and tire assemblies found on cards and light trucks

Dual Wheel Clamping Cylinders 

Dual pneumatic clamping cylinders control all four clamping jaws, eliminating damage to wheel due to slippage

Multi-Position Bead Breaker 

6,000 lbs of power at the bead shovel and a range of up to 17″ wide. The two-stage pneumatic cylinder provides precise power and can be toggled with the foot pedal as needed

Powerful Tire Inflation System 

Powerful air blast operated by the foot pedal. Each moveable jaw is precisely set to the exact position under the wheel to seal the tire bead

Built To Last 

Heavy, solid half inch thick steel clamping table. Rugged steel reinforced chassis. Rust proof air cylinders and valve. On-board compressed air lubricator and regulator

Upgradeable 

EasyMont Pro features a three-piece design with a top roller, pressing foot and lifting disc. Each piece provides a specialized function that assists a single operator in mounting/demounting low-profile and high-performance tires

Monty 1675 SS

​

Outer-Clamping Diameter                10″-24″ (250 – 609.6 mm)

Inner-Clamping Diameter                 12″-24″ (304.8 – 609.6 mm)

Maximum Wheel Width                    15″ (380 mm)

Maximum Tire Diameter                   53″ (1,346 mm)

Compressed Air Supply                   110-170 PSI (7.6-11.7 BAR)

Adjustable Four Claw Clamp            Included

Integrated Bead-Seating Jets           Included

Pressure Timer                                 Included

Twin Cylinder Turntable Clamping    Included

Rotation Speed                                CW 7-18 | CCW 7 RPM

Bead Breaker Power                        2,700 lbs (12 kN)

Bead Breaker Range                        1.7″ – 16.3″ (43-414 mm)

Recommended Floor Space             53.3″ x 46.1″ x 80.75″

Shipping Weight                               750 lbs (340 Kg)

Power Requirements                        230V 1Ph 50/60Hz 16A

​

Hofmann Monty 1675 SmartSpeed

The Hofmann® 1675 tire changing system is ideal for handling passenger cars, light trucks and high-performance wheel/tire assemblies. Ergonomic design and safety enhancing features provide the technician a safe workspace when changing a variety of tires. Locking mount/demount head offset provides maximum cosmetic safety for expensive wheels and significantly reduces the risk of harming wheel/tire assemblies.

​

Part Number:  

EEWH779CU1

​​

Robust, Professional Design

Precision cast and machined shoes with robust cast jaws make for precise, slop free clamping

Heavy-duty pneumatic valves are simple to operate and offer intuitive functionality

Powerful electric motor generates 1200Nm of torque to the table top to mount stiff, difficult tires

​​

smartSpeed™ Model

Automatically minimizes damage to tires

Innovative, patented technology that optimizes the torque applied to the wheel and automatically sets the maximum rotation speed of the wheel

Variable from 7 to 18 RPM; offering the highest possible speed for maximum productivity

Ergonomic, Hand Operated Bead Breaker Control

Newly designed bead breaker is easy to use and prevents the technician from having to straddle the assembly during bead breaking

Integrated Pressure Limiter

Stops air flow once pressure has reached 55 PSI (3.5 Bar) preventing accidental tire over-inflation

Mount/Demount Head

Locking of the mount/demount head offset, which provides maximum cosmetic safety for expensive wheels and significantly reduces the risk of harming wheel/tire assemblies

Tire Lifting Tool

Integrated bead pusher assists in the mount/demount process of the upper bead. Tire lifting tool aids the technician with the demounting process

Swing-Arm Configuration

Quick and easy setup. Stays within a compact footprint, even with larger tire sizes. Provides an ergonomic tire changing position

Monty 1625 SS

​

Outer-Clamping Diameter                10″-24″ (250 – 609.6 mm)

Inner-Clamping Diameter                 12″-24″ (304.8 – 609.6 mm)

Maximum Wheel Width                    15″ (380 mm)

Maximum Tire Diameter                   53″ (1,346 mm)

Compressed Air Supply                   110-170 PSI (7.6-11.7 BAR)

Adjustable Four Claw Clamp            Included

Integrated Bead-Seating Jets           Included

Pressure Timer                                 Included

Twin Cylinder Turntable Clamping    Included

Rotation Speed                                 CW 7-18 | CCW 7 RPM

Bead Breaker Power                         2,700 lbs (12 kN)

Bead Breaker Range                        1.7″ – 16.3″ (43-414 mm)

Recommended Floor Space             53.3″ x 46.1″ x 80.75″

Shipping Weight                                750 lbs (340 Kg)

Power Requirements                        230V 1Ph 50/60Hz 16A

​

Hofmann Monty 1625 SmartSpeed

Hofmann’s monty® 1625 Two-Speed tire changer is designed for high-volume tire shops, multi-bay repair shops and car dealerships. The monty 1625 series swing-arm tire changers feature 24″ outer-wheel clamping standard (28″ with optional adapters). The advantage of 14 RPM allows the technician faster throughput through the bay. These tire changers feature a four-jaw clamping chuck which is self-centering and clamps wheels with either a 26″ inner or 24″ outer diameter.

​

Part Number:  

EEWH748B

​​

Patented smartSpeed™ Technology

Automatically minimizes damage to tires

Innovative, patented technology that optimizes the torque applied to the wheel and automatically sets the maximum rotation speed of the wheel

Variable 7 RPM to 18 RPM offering the highest possible speed for maximum productivity

Accommodates Large Wheel & Tire Assemblies 

Allowing for a tire diameter of 50″ on the monty 1625 (42″ on monty 1625em), and outer-wheel diameters of 24″. The monty 1625/1625em can handle wheel and tire assemblies found on cars and light trucks

Dual Wheel Clamping Cylinders 

Dual pneumatic clamping cylinders control all four clamping jaws, eliminating damage to wheels due to slippage

Four-Jaw Clamping Chuck 

Self-centering and clamps wheels with either 26″ inner or 24″ outer diameter

Multi-Position Bead Breaker 

6,000 lbs of power at the bead shovel and a range of up to 18″ wide. The two-stage pneumatic cylinder provides precise power and can be toggled with the foot pedal as needed

Powerful Tire Inflation System 

Powerful air blast operated by the foot pedal. Each movable jaw is precisely set to the exact position under the wheel to seal the tire bead

Built To Last 

Heavy, solid 1/2″ thick steel clamping table. Rugged steel-reinforced chassis. Rust-proof air cylinders and valves. Compressed air lubricator and regulator on-board

Monty 1620

​

Tower technology                             Swing arm

Clamping System                             Turntable & clamping jaws

Clamping range                               10″ – 24″

Outside clamping range                   10″ – 21″

Inside clamping range                     12″ – 24″

Easymont pro                                  Optional

Capability                                         70 kg

Power supply                                   115 VAC 1Ph 50/60 Hz

Dimensions LxWxH                          72″ x 68″ x 85″

Weight                                              600 lbs

​

Hofmann Monty 1620

The Hofmann® monty® 1620 is designed for high-volume tire shops, multi-bay repair shops and car dealerships. The monty 1620 swing-arm tire changer features 21″ outer-wheel clamping standard (26″ with optional adapters), and accommodates tire diameters up to 50″ and a wheel width of 15″. It can also be upgraded by adding Hofmann’s patented EasyMont Pro, aiding in single-operator mounting/demounting of extra-stiff, low-profile, high-performance and run-flat tires.

​

Part Number:  

monty1620

​

Accommodates Large Wheel & Tire Assemblies 

Allowing for a tire diameter of 50″ and an outer-wheel diameter of 21″, the monty 1620 can handle wheel and tire assemblies found on cars and light trucks​

Dual Wheel Clamping Cylinders 

Dual pneumatic clamping cylinders control all four clamping jaws, eliminating damage to wheels due to slippage

Four-Jaw Clamping Chuck 

Self-centering and clamps wheels with either 24″ inner or 21″ outer diameter

Multi-Position Bead Breaker 

6,000 lbs of power at the bead shovel and a range of up to 15 3/8″ wide. The two-stage pneumatic cylinder provides precise power and can be toggled with the foot pedal as needed, making both the stiffest and the softest sidewalls a snap

Powerful Tire Inflation System 

Powerful air blast operated by the foot pedal. Each moveable jaw is precisely set to the exact position under the wheel to seal the tire bead

Built To Last 

Heavy, solid 1/2″ thick steel clamping table. Rugged steel-reinforced chassis. Rust-proof air cylinders and valves. Compressed air lubricator and regulator on-board

​

Upgradeable 

EasyMont Pro features a three-piece design with a top roller, pressing foot and lifting disc. Each piece provides a specialized function that assists a single operator in mounting/demounting low-profile and high-performance tires

Optional Wheel Protectors 

Protects even the most expensive alloy wheels and provides extra insurance with ultimate wheel protection so that even the most expensive wheels can be changed without an additional expense

Monty 1575

Hofmann Monty 1575

The Hofmann® monty® 1575 is ideal for shops looking for great value without sacrificing productivity. It includes wheel protectors so even the most expensive wheels can be changed without additional expense and fear of cosmetic damage. The monty 1575 can also be upgraded by adding Hofmann’s patented EasyMont Pro, aiding in single-operator mounting/demounting of extra-stiff, low-profile, high performance and run-flat tires.

​

Part Number:  

monty1575

​

Accommodates Large Wheel & Tire Assemblies 

Allowing for a tire diameter of 40″ (1016 mm) and outer-wheel diameters of 21″ (530 mm), the monty 1575 can handle wheel and tire assemblies found on cars and light trucks

Dual Wheel Clamping Cylinders 

Dual pneumatic clamping cylinders control all four clamping jaws, eliminating damage to wheels due to slippage

Adjustable Four-Jaw Clamping Chuck 

Self-centering jaw clamps wheels from either 26″ inner or 24″ outer diameter

Powerful Two-Stage Bead Breaker 

6,000 lbs (2,722 kg) of power at the bead shovel and a range of up to 14″ (356 mm) wide. The two-stage pneumatic cylinder provides precise power and can be toggled with the foot pedal as needed. Both the stiffest and the softest sidewalls are a snap

Powerful Tire Inflation System 

Powerful air blast operated by the foot pedal. Each movable jaw is precisely set to the exact position under the wheel to seal the tire bead

Upgrade With Optional Easymont Pro 

Easymont Pro features a three-piece design with a top roller, pressing foot and lifting disc. Each piece provides a specialized function that assists a single operator in mounting/demounting low-profiles and high performance tires

​

Tower technology                             Swing arm

Overall Wheel Clamping Diameter  10″-26″ (25-66 cm)

Inner Wheel Clamping Diameter     12″-26″ (30-66 cm)

Outer Wheel Clamping Diameter    10″-24″ (25-61 cm)

Bead Breaker Range                       3″-13″ (7.6-33 cm)

Bead Loosening Power                    6,000 lbs (2,722 kg)

Max Wheel Width                            13″ (33 cm)

Max Outer Tire Diameter                 40″ (101.6 cm)

Shipping Weight                              550 lbs (249.5 kg)

Power Requirements                       120V 1Ph 60Hz

​