Shop

Shop

Hofmann

Monty 4400

Hofmann Monty 4400

Rugged chuck design, double reinforced frame allowing to handle wheels of up to 1500 kg, control unit with switch to control two operations simultaneously, 2 chuck speed.

​

Part Number:  

M4400220

​

Rugged chuck design

Double reinforced frame allowing to handle wheels of up to 1500 kg

Unique patented bead breaker disc for easy operation

Control unit with switch to control two operations simultaneously

2 Chuck speeds, preset with a switch

Vast range of standard accessories

Wheel diameter                 90.5 inch

Wheel width                       43 inch

Chuck speed                     4/8 RPM

Hydraulic pressure             bar

Hydraulic motor                 1,5 kW

Power supply                     200 VAC 3Ph 60 Hz

Net weight lbs                    2079 lbs

Monty 8800

Max. Tire Width                         15″ (380 mm)

Max. Rim Width                        13″ (330 mm)

Max. Wheel Diameter               47″ (1200 mm)

Reverse Wheels                       12″ (305 mm)

Wheel Lift Capacity                   154 lb (70 kg)

Standard Power Supply            230V 1Ph 50-60Hz 16A

Air Pressure Required              116-174 PSI (8-12) BAR

Footprint (W x D x H)                58″ x 73″ x 74″

​

​

Hofmann Monty 8800

The Hofmann® monty® 8800 is a leverless tire changer that features smartSpeed™, an integrated wheel lift, on-floor bead breaker, lower bead camera viewer and QuickLok™ technology. It is the perfect solution for high-volume shops that are looking to increase performance, safety and productivity. The Hofmann® monty® 8800 includes an exclusive set of standard accessories, including a reverse mount wheel kit and light truck kit, allowing shops to service a wider range of wheels.

​

Part Number:  

EEWH778AUB

​

Bead Pusher Technology
Integrated bead pusher assists in the mount process of the upper bead.

Intuitive Control Panel
Simple, color-coded control panel matches machine operating procedures.

Center Post Clamp
Traditional center post design accommodates a wide range of wheel sizes.

powerMONT™
Innovative and fast mount/demount system with simple controls for precise tool positioning to prevent tire damage and technician injury.

Dynamic Bead Breaker System
Synchronized dual disks for precision positioning on upper and lower beads with adjustable tilt for hard sidewall tires.

Top Side Bead Seater
Ergonomic nozzle injects high-speed air blast into the tire, rising the bead to seal the tire to the rim.

smartSpeed™ Technology
Continuously controls mount/demount conditions to provide optimum torque/ speed combination, from 7 to 20 RPM.

Integrated Wheel Lift
Pedal operated wheel lift assists technicians in lifting and positioning heavy tires, helping to reduce fatigue and increase productivity.

On-Floor Breaker
The best tool to break the tire bead mounted on steel rims. 

Monty 3850

For wheels type                               Road

Rim diameter no extensions            14” – 26”

Clamping axial orientation               horizontal

Chuck speed                                   1

Bead breaker type                           Disk

Mounting tool type                           Tool

Demounting tool type                      Fixed Disk / Tool

Tools tangential to the rim               No

Tool left/right travel                          Manual 3 positions

Tool rotation                                     Manual w/ lever

Tool positioning                               Manual

Hydraulic pump flow                        4,5

Hydraulic pressure                          160 bar

Integrated wheel lift                         No

Hydraulic motor                               1,5 kW

Chuck motor                                    1,8 kW

Power supply                                   230 VAC 1Ph 50/60 Hz

Hofmann Monty 3850

Electro-hydraulic drive, mobile control unit, bead breaker roll and mounting/demounting tool fitted on swing arm, safety valve on chuck prevents accidental unclamping of wheels.

​

Part Number:  

M3850230

​

Electro-hydraulic drive

Mobile control unit

Positioning of wheel and tool within a wide accurate adjustment range

Infinitely self-centring universal hydraulic chuck

Bead breaker roll and mounting/demounting tool fitted on swing arm

Safety valve on chuck prevents accidental unclamping of wheels

Ergonomic operation owing to vertically adjustable control unit

Monty 8700

Max. Rim Diameter                   12″-30″

Max. Tire Width                         15″ (380mm)

Max. Rim Width                        13″ (330 mm)

Max. Wheel Diameter               47″ (1200 mm)

Wheel Lift Capacity                   154 lbs (70kg)

Standard Power Supply            230V 1Ph 50/60Hz 16A

Air Pressure Required              116-174 PSI (8-12 BAR)

Footprint (W x D x H)                58″ x 73″ x 74″

Shipping Weight                       1047 lbs (475 kg)

​

​

Hofmann Monty 8700

The monty® 8700 tire changer was developed for maximum shop productivity and superior service quality for shops that work with run-flat and high-performance tires. It features an easy-to-use center post design that reduces the risk of wheel damage and accommodates a wide range of wheel sizes.

​

Part Number:  

EEWH77OAUA

​

Bead Pusher Technology
Integrated bead pusher assists in the mount process of the upper bead.

Intuitive Control Panel
Simple, color-coded control panel matches machine operating procedures.

Center Post Clamp
Traditional center post design accommodates a wide range of wheel sizes.

powerMONT™
Innovative and fast mount/demount system with simple controls for precise tool positioning to prevent tire damage and technician injury.

Dynamic Bead Breaker System
Synchronized dual disks for precision positioning on upper and lower beads with adjustable tilt for hard sidewall tires.

Top Side Bead Seater
Ergonomic nozzle injects high-speed air blast into the tire, rising the bead to seal the tire to the rim.

smartSpeed™ Technology
Continuously controls mount/demount conditions to provide optimum torque/ speed combination, from 7 to 20 RPM.

Integrated Wheel Lift
Pedal operated wheel lift assists technicians in lifting and positioning heavy tires, helping to reduce fatigue and increase productivity.

Monty 3650

For wheels type                              Road

Rim diameter no extensions          16″ – 22.5″

Clamping axial orientation              horizontal

Chuck speed                                  1

Bead breaker type                          Roller + Roller / Tool

Mounting tool type                          Roller / Tool

Demounting tool type                     Roller / Tool

Tools tangential to the rim              No

Tool left/right travel                         Manual 2 positions, chuck adjustable

Tool rotation                                   Manual w/ pin

Tool positioning                              Manual

Hydraulic pump flow                      3

Hydraulic pressure                        160 bar

Integrated wheel lift                       No

Hydraulic motor                             0.75 kW

Chuck motor                                  0.75 kW

Power supply                                 230 VAC 1Ph 50/60 Hz

Max footprint dimensions              1270 x 1290 x 1100 mm

Net weight lbs                                728 lbs

Hofmann Monty 3650

Access ramp for easy loading of the tire changer, two rollers for bead breaking and tire changing allow quick operation, easy control via integrated control console, clamping of wheel by its center bore via cone and wing nut.

​

Part Number:  

M3650230

​

Access ramp for easy loading of the tire changer

Two rollers for bead breaking and tire changing allow quick operation. Both the inner and outer beads are demounted in a single process.

The innovative design of monty 3650 ensures that the rollers are always centered relative to the wheel.

​

Wheels, rollers and control console are so positioned relative to each other to make retreading of tires extremely convenient.

Easy control via integrated control console

Clamping of wheel by its center bore via cone and wing nut

Monty 8600

Max. Rim Diameter                   12″-30″

Max. Tire Width                         15″ (380mm)

Max. Wheel Diameter               47″ (1200 mm)

Wheel Lift Capacity                   154 lbs (70kg)

Standard Power Supply            230V 1Ph 50/60Hz 16A

Air Pressure Required              110-140 PSI

Footprint (W x D x H)                70″ x 89″ x 59″

Shipping Weight                       1047 lbs (475 kg)

​

​

Hofmann Monty 8600

The dual-disc bead breaker, center clamp system and automatic demounting tool make the monty® 8600 the most productive tire changer solution on the market.

Leverless demounting and powered wheel lift reduce technician fatigue and opportunity for injury. Dual disc bead breakers and servo positioned and electronically synchronized so the technician can efficiently maintain a safe and ergonomic bay position.

​

Part Number:  

EEWH742AHNA

​

Wheel Lift 

Reduces fatigue and the chance for injury presented by handling heavy tires and rims

Wheel Center Pilot Hole Clamping 

Center piloting eliminates rim edge damage and provides positive center hold clamping using a cone and quick nut

Laser Positioned Tooling 

Precise rim edge positioning prevents damage to the wheel or tire due to misaligned tool

Ergonomic Dual Bead Breakers 

Easily positioned upper bead breaker and servo driven lower bead breaker. Lower bead breaker is automatically positioned via the upper bead breaker position

Leverless Demount Head 

Integrated demounting finger gently pulls the bead over the rim edge, reducing the possibility of tire or wheel damage

Bead Assist 

Follows the rotation to position the bead in the wheel’s drop center on difficult, stiff side wall, tires

Integrated Tire Inflation System 

Quick and safe top side bead seating and inflation included

Storage Compartment 

Easy access for tools and accessories

Quick Fit Center Wheel Clamping 

Center wheel clamping provides easy and precise wheel mounting while avoiding damage