Shop

Shop

Hofmann

15k 2 Post

Hofmann 15k 2 Post

The 15k Two-Post lift features low profile arms, single point air actuated lock release, oversized steel pulleys, 60″ lifting carriage, padded overhead shut off bar and adapter accessories. Standard height and extended height models available.

​

Part Number:  

EELR739A

​

15,000 lbs of heavy-duty lifting power

Symmetrical lifting with heavy-duty arm restraint system

Single point air actuated safety lock release – allows technician to disengage both columns simultaneously

Tall 60″ lifting carriages balance the long reaching 62″ lift arms, optimizing load disbursement in the column

Standard combination stack screw pads accommodate a wide range of manufacturers’ recommended vehicle pick up points

Oversized steel pulley reduces internal stress on equalization cables and provides increased durability

Padded overhead shut off system prevents vehicle damage from being raised too high

Certified to the ANSI/ALI ALCTV:2011 automotive lift standard

Capacity                                      15000 lbs

Lifting times                                 60 s

Drive-through width                     104.25 inch

Power supply                               230 VAC 1Ph 50/60 Hz

Distance between columns         119.875 inch

Minimum ceiling height               176 inch

Overall Width                              154.75 inch

Geoliner 660

Wheel Size (AC200)   19″ – 39″

Tire Size (AC400)       19″ – 39″

Power supply 115 VAC 1Ph 50/60 Hz

Track width                  48″ – 96″

Wheel base                 79″ – 180″

Hofmann Geoliner 660

Now there’s an advanced imaging alignment system that doesn’t require lots of training or experience to operate.

With the latest XD target and camera system, the geoliner® 660 Imaging Wheel Aligner features advanced technology, combined with the simplest, most intuitive software we’ve ever offered – providing the essential tools for any alignment tech to do their job quickly and accurately with ease.

​

Part Number:  

EEWA712TH3

XD Cameras

The geoliner® 660 Imaging Wheel Aligner’s advanced XD cameras and sophisticated monitoring algorithms find errors as they’re made, detecting problems with suspension stress and damage, rack, clamps, environment, and more – notifying users only when necessary, to save time and ensure accuracy on every alignment.

​

Compensate: Error is completely compensated with no notification to the user

​

Warn: Error is completely compensated with user warned when a correction was applied

​

Alert: Critical error leading to a bad alignment is detected; user notified that corrective action is required

​

Advanced Camera Systems

The camera beam automatically follows as the vehicle is raised by tracking the targets

High-resolution cameras produce accurate, live alignment readings and diagnostic data

Video camera monitors the alignment and provides critical information to get the job done right

​

Exclusive Dimensioning and Productivity Features

Vehicle track width and wheelbase

Individual wheel side set and set-back

Patented EZ-TOE eliminates the need for steering wheel holder

Guided adjustments of single tire rod, drag link and cradle

​

Patented EZ-TOE

Turn the front wheels and access difficult adjustment points while still displaying centered toe readings.

​

Ride Height Measurement

Manual ride height to obtain proper alignment specifications for those vehicles requiring it.

​

Patented EZ-TOE

Turn the front wheels and access difficult adjustment points while still displaying centered toe readings

​

Manufacturer Specifications

Extensive OEM specifications allow quick and accurate vehicle selection.

​

Included Accessories:

AC200 Clamps

Brake Pedal Depressor

Color Ink-Jet Printer

Steering Wheel Holder

​

Geoliner 650 XD

Wheel Size (AC200)   11″ – 24″

Power supply 115 VAC 1Ph 50/60 Hz

Track width                  48″ – 96″

Wheel base                 79″ – 180″

Hofmann Geoliner 650 XD

The geoliner® 650 XD Imaging Wheel Aligner provides core features for the alignment professional.

Patented imaging technology provides accurate and real-time measurements that improve productivity. User-friendly features, such as EZ-TOE, and an extensive vehicle specification database help deliver customer satisfaction, as well as technician ease of use.

​

Part Number:  

EEWA712G

Finding Your Way Around Any Alignment Problem Just Got Simpler

Now there’s an imaging alignment system that’s sophisticated but doesn’t require lots of training or experience to operate. With the latest XD target and camera system, the geoliner® 650 XD Imaging Wheel Aligner features advanced technology, combined with the simplest, most intuitive software we’ve ever offered –  providing the essential tools for any alignment tech to get the job done.

​

Versatile, Accurate Hardware

High-resolution cameras produce accurate, live alignment readings and diagnostic data

Passive front and rear XD targets improve durability with no electronics to damage

Advanced XD targets and AC200 clamps are lightweight, durable and impact resistant

Standard Dimensioning and Productivity Features

Vehicle track width and wheelbase

Individual wheel side set and set-back

Patented EZ-TOE eliminates the need for steering wheel holder

Guided adjustments of single tire rod, drag link and cradle

​

Ride Height Measurement

Manual ride height to obtain proper alignment specifications for those vehicles requiring it.

​

Patented EZ-TOE

Turn the front wheels and access difficult adjustment points while still displaying centered toe readings

​

Manufacturer Specifications

Extensive OEM specifications allow quick and accurate vehicle selection.

​

VODI™ 

Patented Vehicle Orientation Directional Indicator guides the technician through the measurement process.

​

Help Videos 

View detailed videos of how to make needed adjustments to complete even the most complex tasks.

Geoliner 630

Tire Size (AC400)       Up to 37″

Wheel Size (AC200)   13″ – 24″

Power supply 115 VAC 1Ph 50/60 Hz

Track width                  48″ – 96″

Wheel base                 79″ – 180″

Hofmann Geoliner 630

Utilizing advanced imaging technology, the Hofmann® geoliner® 630 Imaging Wheel Aligner provides accurate, real-time measurements – reducing setup and measurement times while generating serious productivity benefits.

Matched with our latest software, the geoliner® 630 Imaging Wheel Aligner will have your technicians getting readings in a matter of minutes.

​

Part Number:  

EEWA721G

​

Compact All-In-One Installation

With an exclusive tilting beam that allows for alignment at multiple rack heights or on stands.

​

Next-Generation User Interface with Intelligent, Predictive Alignment Flow

Quick access to vehicle history from the home screen, manual vehicle selection by VIN and with optional VIN scanner, and an all-new graphic display optimized for maximum clarity and visibility.

Video Speed Cameras Constantly Monitor The Alignment And Provide Critical Information To Get The Job Done Right

Detection of common environmental conditions and vehicle problems that result in maladjustment.

​

Patented VODI™ (Vehicle Orientation Directional Indicator)

Guides the technician through the measuring process, reducing the amount of time spent walking back and forth from the vehicle to the aligner.

Passive Front and Rear Targets

Provide improved durability with no electronics to damage.

​

Online Connectivity Automatically Downloads Specifications and Software Updates, Allowing Remote Diagnostics for Service

Requires customer provided internet connection

One year of specifications provided

Single updates and one to five-year subscriptions are available for purchase

Enhanced online vehicle repair information is available for one year for no charge with subscription

​

Standard Accessories Include:

Set of AC200 wheel clamps & targets

Brake pedal depressor

Steering wheel holder

Two wheel chocks

Color inkjet printer​

Geoliner 590

Tire Size (AC400)       Up to 37″

Power supply 115 VAC 1Ph 50/60 Hz

Track width                  48″ – 96″

Wheel base                 79″ – 180″

Hofmann Geoliner 590

The Hofmann® geoliner® 590 Mobile Wireless Imaging Wheel Aligner combines imaging alignment technology in a fully portable package – providing advanced technology and software to enable speed and efficiency at an affordable price.

The geoliner® 590 Mobile Wireless Imaging Wheel Aligner leverages a wireless communication system with Bluetooth® technology, and cordless pods powered by lithium ion batteries – offering mobility and flexibility in the wheel alignment process.

​

Part Number:  

EEWA717C

​

Patented EZ-TOE

Turn the front wheels and access difficult adjustment points while still displaying centered toe readings.

​

Ride Height Measurement

Measure ride height and obtain proper alignment specs for those vehicles requiring it.

​

Unmatched Mobility

Bluetooth® enabled wireless communication to sensor pods allowing the technician 330 feet (101 meters) of freedom – even in areas known to have high electrical interference.

​

Durable, Long-Lasting Hardware

Magnesium pods, targets and aluminum clamps are durable, impact-resistant and lightweight.

​

Battery Notification

Alert notifies the technician when the pod’s battery needs to be charged and it provides a full day of operation without charging on most applications.

​

Manufacturer Specifications

Extensive OEM specs allow quick and accurate vehicle selection.

​

Help Videos

View detailed help videos of how to make needed adjustments to complete even the most complex tasks.

​

Customer Reports

Enhance customer satisfaction with personalized reports showing readings before and after service.

​

Geoliner 320

Tire Size (AC400)       Up to 37″

Wheel Size (AC200)   13″ – 24″

Power supply 115 VAC 1Ph 50/60 Hz

Track width                  48″ – 96″

Wheel base                 79″ – 180″

Hofmann Geoliner 320

Using advanced XD cameras and sophisticated monitoring algorithms, the geoliner® 320 Mobile Wireless Imaging Wheel Aligner detects issues with suspension stress and errors from lift clamps, environment, and more.

To save time and ensure accuracy on every alignment, users are notified only when necessary with additional information that is never more than one click away.

​

Part Number:  

EEWA751H

​

With no moving parts and robust, compact design, as well as new alignment software that’s easy to learn and use, the geoliner® 320 Mobile Wireless Imaging Wheel Aligner requires minimal space and none at all in the front of the lift. It’s built to work with any alignment lift style and enhance performance in just about any shop.

​

Rolling run-out compensation means no more hassles: just mount and roll to measure, with no lifting, no head-charging, no head-leveling and no adapters – simply place the geoliner® 320 on the lift and it’s ready to align.

​

Repairable on-site and boasting remote service and automatic software and specification updates, the geoliner® 320 means more revenue for your business, with no more calibrating, no more cables and no more worries.

​

The geoliner® 320 next-generation aligner software features a notification system that provides critical information without slowing down the alignment process, with an adaptive user interface that delivers instant access to productivity tools and assistance whenever required.

​

Using advanced XD cameras and sophisticated monitoring algorithms, the geoliner® 320 Mobile Wireless Imaging Wheel Aligner detects issues with suspension stress and errors from lift clamps, environment, and more. To save time and ensure accuracy on every alignment, users are notified only when necessary – with additional information never more than one click away.

Each rear wheel pod uses two cameras to image a front-wheel target and a reference pod mounted at the front of the car, allowing a clear view of all targets during a full rotation. The left-side reference pod then uses its camera to create a full 3-D alignment without obstructions from low hanging vehicle components.

Reference pods work easily with either a lift or a pit, allowing for flexibility in installation and placement so they don’t interfere with normal workflow. (Typical mounting is at the front edge of the lift surface on the outer edge of the runway.) And since all communication within the geoliner® 320 happens wirelessly, you never have to worry about beams and cables taking up valuable space in the shop.

Geodyna 9000 P

Motorized                         Yes

Wheel clamping               Power Clamp

Diameter of shaft             40 mm

Measuring speed             < 200 rpm

Balancing accuracy         0.035 oz

Angular resolution           ± 0,35°

Length of shaft                225 mm

Start/Stop balance time   8 s

Rim diameter range        8″ – 32″

Offset range                    1″ – 20″

Rim width range              1″ – 20″

Max wheel diameter       37 inch

Max. wheel weight          154 lbs

Input power (amperage) 4 A

Input power (VAC)           230 VAC 1Ph 50/60 Hz

Dimensions LxWxH        57″ x 38.98″ x 67.32″

Net weight                       341 lbs

Hofmann Geodyna 9000 P

A video wheel balancer for cars and light trucks, the geodyna® 9000p features fully automatic non-contact acquisition of all data via 3D imaging technology and five high-resolution cameras, the Power Clamp clamping system, pinpoint easyWEIGHT laser, plus a touch screen interface for unequaled usability, performance and precision.

​

Part Number:  

EEWB771AP230

​

Automatic Acquisition

Non-contact 3D imaging technology is virtually error-proof: just clamp the wheel, close the guard and let the geodyna 9000p do the rest. Automatic and non-contact detection of wheel dimensions, balancing mode, number and position of spokes, amount and position of weights, lateral and radial run-out of tire and rim, match mounting and geometric issues

​

Run-Out Measurement

Non-contact 3D imaging technology scans the rim and tire profile to measure radial tire run-out, bead seat run-out on the bare rim and radial and lateral rim run-out on both sides

​

3D Imaging

Five high resolution laser cameras scan the complete rim and tire profile to provide visual evidence of results, increase customer awareness and improve customer satisfaction

​

Run-Out Force Vectoring (RFV)

Determines the virtual loaded run-out contact patch of the wheel assembly and calculates the spring rate by measuring tread width, sidewall height, surface singularities and estimated tire pressure

​

Sidewall & Tread Analysis

The wheel is scanned to within 0.1 mm accuracy to examine all externally visible scratches, cuts, bulges, blisters, flat spots and uneven wear-out that could potentially lead to safety issues

​

Tire Wear-Out Prediction

Predicts the tire wear-out point to help prepare the customer for when a replacement will be needed

​

Advanced Spoke Detection

Detects spokes to provide optimum placement of weights, allowing for accurate balancing of alloy spoke rims while preserving their visual appearance

​

Wheel Data Freeze

Allows the operator to save the data detected on the first rim of a set of identical wheels, reducing data acquisition time for subsequent identical wheels

​

Smart Profile

Automatically detects optimum balancing program by determining amount, position and type of the balance weights on the basis of rim dimensions saved in memory and imbalance data determined during measurement

​

Patented Automatic Power Clamp

Ensures consistent and constant wheel-clamping force- ensuring accurate balance on all wheels

​

Geodyna 8200

Motorized                         Yes

Wheel clamping               Power Clamp

Diameter of shaft             40 mm

Measuring speed             < 200 rpm

Balancing accuracy         0.035 oz

Angular resolution           ± 0,35°

Length of shaft                225 mm

Start/Stop balance time  4 s

Rim diameter range        8″ – 32″

Offset range                    1″ – 20″

Rim width range              1″ – 20″

Max wheel diameter       42 inch

Max. wheel weight          154 lbs

Input power (amperage) 4 A

Input power (VAC)           230 VAC 1Ph 50/60 Hz

Dimensions LxWxH        76.4″ x 40.2″ x 61.8″

Hofmann Geodyna 8200

A video wheel balancer for cars and light trucks, the geodyna® 8200 series feature fully automatic data entry via scanner and Smart Sonar, the Power Clamp electromechanical clamping system, the pinpoint easyWEIGHT™ laser and touchscreen interface for unequaled productivity and unbeatable performance.

​

Part Number:  

EEWB766BE5

​

Radial Run-Out 

High-accuracy laser technology measures degree of deviation from a perfect circle, enabling match-mounting to improve roundness and reduce geometric vibrations.

​

Power Clamp 

The patented automatic power clamp electromechanically clamps the wheel accurately with a constant force, reducing the opportunity for chasing weight.

​

User Interface 

Highly intuitive touchscreen user interface allows for rapid, time-saving selection of cycle modes: fully automatic with spoke detection, fast automatic without spoke detection and manual.

​

Automatic Spoke Detection 

Scanner automatically detects number and position of rim spokes. Provides easy recall of split weight mode for hidden adhesive weights by simply pressing an icon on the screen.

​

Stop In Position 

Automatically indexes the wheel to correction position depending on balancing.

​

easyWEIGHT 

Pinpoint red laser provides fast, accurate, easy positioning of adhesive weights on the wheel, identifying exact weight placement locations for increased accuracy and productivity.

​

geodata Arm 

A unique and patented alternative to easyWeight for the positioning of adhesive weights.

​

Rim Lighting 

High-brightness LED lighting system allows for more accurate acquisition of rim dimensions, facilitates rim cleaning and weight positioning.

​

Telescopic Wheel Guard 

Patented ergonomic wheel guard saves space in the shop while keeping the handle positioned at a comfortable height.

​

Geodyna 7800 P

Motorized                         Yes

Wheel clamping               Power Clamp

Diameter of shaft             40 mm

Measuring speed             < 200 rpm

Balancing accuracy         0.035 oz

Angular resolution           ± 0,35°

Length of shaft                225 mm

Start/Stop balance time  4.5 s

Rim diameter range        8″ – 32″

Offset range                    1″ – 20″

Rim width range              1″ – 20″

Max wheel diameter       42 inch

Max. wheel weight          154 lbs

Input power (amperage) 1.1 A

Input power (VAC)           230 VAC 1Ph 50/60 Hz

Dimensions LxWxH        76.4″ x 40.2″ x 61.8″

Hofmann Geodyna 7800 P

The wheel balancer for garages, car dealerships, tire shops and premium workshops with high tire service volume. With touchscreen monitor, automatic non-contact data entry and easyWEIGHT™ pinpoint indicator light – An accurate, fast and easy solution to position adhesive weights on the wheel.

​

Part Number:  

EEWB753BE8

​

Productivity Enhancing Features

Automatic data entry and selction of balancing mode via scanner and Smart Sonar

Automatic spoke detection – automatically detects number and position of rim spokes

One-spin balance

VPM measurement technique for uncompromised accuracy

​

Intuitive, Ergonomic Design

Platinum touchscreen user interface – new resistive touch display with large icons for use with or without gloves on

Fast and intuitive selection of the cycle modes: fully automatic with spoke detection, fast automatic without spoke detection and manual mode

​

Patented ergonomic telescopic wheel guard reduces the overall equipment footprint

​

geodata 

The geodyna 7800p is equipped with the geodata arm, a unique and patented tool

​

VPM Measurement Technique 

The geodyna 7800p comes with the patented virtual plane measurement (VPM) technique which ensures accurate balancing results, while being insensitive to ambient conditions

​

easyWEIGHT 

Pinpoint indicator light – the accurate, fast and easy solution to position adhesive weight on the wheel

​

Power Clamp 

The electromechanical power clamp always clamps the wheel accurately and with a constant force

​

Additional Features

The patented Wheel Scanner detects wheel diameter and offset as well as the number and position of wheel spokes

The 225mm long shaft allows the use of accessories with every type of wheel

The operator only has to touch the amount of unbalance on the screen and the tire is automatically indexed to the correct position

​

Geodyna 7600 P

Motorized                         Yes

Wheel clamping               Power Clamp

Diameter of shaft             40 mm

Measuring speed             < 200 rpm

Balancing accuracy         0.035 oz

Angular resolution           ± 0,35°

Length of shaft                225 mm

Start/Stop balance time  4.5 s

Rim diameter range        8″ – 32″

Offset range                    1″ – 20″

Rim width range              1″ – 20″

Max wheel diameter       42 inch

Max. wheel weight          154 lbs

Input power (amperage) 1.1 A

Input power (VAC)           230 VAC 1Ph 50/60 Hz

Dimensions LxWxH        54.5″ x 34.6″ x 77.2″

Hofmann Geodyna 7600 P

The wheel balancer for tire shops, car dealerships and garages with medium to high tire service volume: with touchscreen monitor and easyWEIGHT pinpoint indicator light – An accurate, fast and easy solution to position adhesive weights on the wheel.

​

Part Number:  

EEWB765AP

​

Intuitive User Interface 

New touchscreen, user-friendly interface on a flat panel, resistive touch display. Fast and intuitive selection of the cycle modes.

​

easyWEIGHT 

Pinpoint indicator light – the accurate, fast and easy solution to position adhesive weight on the wheel.

​

Power Clamp 

The electromechanical power clamp always clamps the wheel accurately with a constant force, which is most important for every balancing operation.

​

Data Entry 

The Smart Sonar automatically detects rim width and the measuring run is started as soon as the wheel guard has been completely lowered. 30% time savings compared to manual input.

​

VPM Measurement Technique 

The geodyna® 7600 series comes with the patented Virtual Plane Measurement (VPM) technique which ensures accurate balancing results, while being insensitive to ambient conditions

​