Shop

Shop

Brand Pages

Geodyna 7340 P

Motorized                         Yes

Wheel clamping               PowerClamp

Diameter of shaft             40 mm

Measuring speed             < 200 rpm

Balancing accuracy         0.035 oz

Angular resolution           ± 0,35°

Length of shaft                225 mm

Rim diameter range        8″ – 32″

Offset range                    1″ – 20″

Rim width range              1″ – 20″

Max wheel diameter       42 inch

Max. wheel weight          154 lbs

Input power (VAC)          230 VAC 1Ph 50/60 Hz

Dimensions LxWxH        54″ x 35″ x 66″

Hofmann Geodyna 7340 P

The geodyna® 7340 wheel balancer is the ideal solution for independent tire shops, garages and dealers; offering high performance, small physical footprint and accurate balancing results in the first run. Our geoTOUCH™ technology provides intuitive operation with a wide, heavy-duty touchscreen for ease-of-use and improved ergonomics.

​

Part Number:  

EEWB774APE11

​

geoTOUCH™

Intuitive operation given by the wide screen, large digits for the amount of the balance weight and bright indicators for the weight position. Ergonomics and ease of use with touchscreen user interface.

​

Patented Power Clamp

Electromechanicaly clamps the wheel accurately with a constant force, reducing the opportunity for chasing weight.

​

easyWEIGHT 

Pinpoint indicator light offers an accurate, fast and easy solution to position adhesive weight on the wheel

​

Smart Sonar™

Automatic, non-contact rim width acquisition delivers greater accuracy and ease-of-use for a 30% savings in a complete process when compared to manual operation.

​

easyALU™

Touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode.

​

QuickBAL™

30% reduced cycle time, less than 4.5 seconds, maintaining the same high accuracy.

​

Multiple Users

Two operators can operate with the balancer simultaneously and quickly recall their rim dimensions.

​

Included Accessories:

Four Cone Kit (EAK0309J28A)

Weight Pliers (00058839000)

​

Accessory Kit for Power Clamp (EAA0307G54A)

​

Geodyna 7400 L

Motorized                         Yes

Wheel clamping               QuickNut

Diameter of shaft             40 mm

Measuring speed             < 200 rpm

Balancing accuracy         0.035 oz

Angular resolution           ± 0,35°

Length of shaft                225 mm

Rim diameter range        8″ – 32″

Offset range                    1″ – 20″

Rim width range              1″ – 20″

Max wheel diameter       42 inch

Max. wheel weight          154 lbs

Input power (VAC)           115 VAC 1Ph 50/60 Hz

Dimensions LxWxH        54.5″ x 34.6″ x 77.2″

Hofmann Geodyna 7400 L

Unparalleled speed and accuracy, with non-contact rim width acquisition via smartSonar, exact weight placement via the easyWEIGHT pinpoint laser, and a 19″ LCD monitor featuring step-by-step video instructions and an intuitive user interface.

​

Part Number:  

EEWB764AL

​

easyWEIGHT 

Pinpoint indicator light offers an accurate, fast and easy solution to position adhesive weight on the wheel

​

Accurate and Quick Clamping 

With the included cones or the optional stud-hold flange accessory, clamping is fast and easy

​

Short Balancing Cycle

The geodyna 7400l is equipped with a semi-automatic data entry for rim diameter and offset

smartSonar automatically detects rim width and the measurement cycle is started as soon as the wheel guard has been completely lowered

​

Intuitive Interface

User-friendly interface where all functions are clearly marked with picture icons

Large digits for the amount of the balance weight and bright indicators for weight position

Fast and intuitive selection of the cycle modes

​

Geodyna 7200 S

Motorized                         Yes

Wheel clamping               QuickNut

Diameter of shaft             40 mm

Measuring speed             < 200 rpm

Balancing accuracy         0.035 oz

Angular resolution           ± 0,35°

Length of shaft                225 mm

Rim diameter range        8″ – 32″

Offset range                    1″ – 20″

Rim width range              1″ – 20″

Max wheel diameter       42 inch

Max. wheel weight          154 lbs

Input power (VAC)          230 VAC 1Ph 50/60 Hz

Dimensions LxWxH        40″ x 30″ x 72″

Hofmann Geodyna 7200 S

The geodyna® 7200s High Performance Wheel Balancing System is ideal for all shops – small footprint complimented by the video display provides high-end features in a compact design. In under ten seconds, the color display shows the location of any imbalance and identifies the optimal tape on or clip-on weight location. The fast spin cycle provides accurate measurement with minimum cycles for fast results

​

Part Number:  

EEWB746AS

​

Ideal for all shops – small footprint complimented by the video display provides high-end features in a compact design

In under ten seconds, the color display shows the location of any imbalance and identifies the optimal tape on or clip-on weight location

​The fast spin cycle provides accurate measurement with minimum cycles for fast results

smartSonar simplifies parameter entry

Patented Virtual Plain Imaging (VPI) for precise measuring

Hidden weight mode

Automatic braking of the wheel after measurement

Pedal operated main shaft lock

Tire and wheel optimization program

Compact dimensions – for installation close to a wall

​

Geoliner 630

Tire Size (AC400)       Up to 37″

Wheel Size (AC200)   13″ – 24″

Power supply 115 VAC 1Ph 50/60 Hz

Track width                  48″ – 96″

Wheel base                 79″ – 180″

Hofmann Geoliner 630

Utilizing advanced imaging technology, the Hofmann® geoliner® 630 Imaging Wheel Aligner provides accurate, real-time measurements – reducing setup and measurement times while generating serious productivity benefits.

Matched with our latest software, the geoliner® 630 Imaging Wheel Aligner will have your technicians getting readings in a matter of minutes.

​

Part Number:  

EEWA721G

​

Compact All-In-One Installation

With an exclusive tilting beam that allows for alignment at multiple rack heights or on stands.

​

Next-Generation User Interface with Intelligent, Predictive Alignment Flow

Quick access to vehicle history from the home screen, manual vehicle selection by VIN and with optional VIN scanner, and an all-new graphic display optimized for maximum clarity and visibility.

Video Speed Cameras Constantly Monitor The Alignment And Provide Critical Information To Get The Job Done Right

Detection of common environmental conditions and vehicle problems that result in maladjustment.

​

Patented VODI™ (Vehicle Orientation Directional Indicator)

Guides the technician through the measuring process, reducing the amount of time spent walking back and forth from the vehicle to the aligner.

Passive Front and Rear Targets

Provide improved durability with no electronics to damage.

​

Online Connectivity Automatically Downloads Specifications and Software Updates, Allowing Remote Diagnostics for Service

Requires customer provided internet connection

One year of specifications provided

Single updates and one to five-year subscriptions are available for purchase

Enhanced online vehicle repair information is available for one year for no charge with subscription

​

Standard Accessories Include:

Set of AC200 wheel clamps & targets

Brake pedal depressor

Steering wheel holder

Two wheel chocks

Color inkjet printer​

Geodyna 9000 P

Motorized                         Yes

Wheel clamping               Power Clamp

Diameter of shaft             40 mm

Measuring speed             < 200 rpm

Balancing accuracy         0.035 oz

Angular resolution           ± 0,35°

Length of shaft                225 mm

Start/Stop balance time   8 s

Rim diameter range        8″ – 32″

Offset range                    1″ – 20″

Rim width range              1″ – 20″

Max wheel diameter       37 inch

Max. wheel weight          154 lbs

Input power (amperage) 4 A

Input power (VAC)           230 VAC 1Ph 50/60 Hz

Dimensions LxWxH        57″ x 38.98″ x 67.32″

Net weight                       341 lbs

Hofmann Geodyna 9000 P

A video wheel balancer for cars and light trucks, the geodyna® 9000p features fully automatic non-contact acquisition of all data via 3D imaging technology and five high-resolution cameras, the Power Clamp clamping system, pinpoint easyWEIGHT laser, plus a touch screen interface for unequaled usability, performance and precision.

​

Part Number:  

EEWB771AP230

​

Automatic Acquisition

Non-contact 3D imaging technology is virtually error-proof: just clamp the wheel, close the guard and let the geodyna 9000p do the rest. Automatic and non-contact detection of wheel dimensions, balancing mode, number and position of spokes, amount and position of weights, lateral and radial run-out of tire and rim, match mounting and geometric issues

​

Run-Out Measurement

Non-contact 3D imaging technology scans the rim and tire profile to measure radial tire run-out, bead seat run-out on the bare rim and radial and lateral rim run-out on both sides

​

3D Imaging

Five high resolution laser cameras scan the complete rim and tire profile to provide visual evidence of results, increase customer awareness and improve customer satisfaction

​

Run-Out Force Vectoring (RFV)

Determines the virtual loaded run-out contact patch of the wheel assembly and calculates the spring rate by measuring tread width, sidewall height, surface singularities and estimated tire pressure

​

Sidewall & Tread Analysis

The wheel is scanned to within 0.1 mm accuracy to examine all externally visible scratches, cuts, bulges, blisters, flat spots and uneven wear-out that could potentially lead to safety issues

​

Tire Wear-Out Prediction

Predicts the tire wear-out point to help prepare the customer for when a replacement will be needed

​

Advanced Spoke Detection

Detects spokes to provide optimum placement of weights, allowing for accurate balancing of alloy spoke rims while preserving their visual appearance

​

Wheel Data Freeze

Allows the operator to save the data detected on the first rim of a set of identical wheels, reducing data acquisition time for subsequent identical wheels

​

Smart Profile

Automatically detects optimum balancing program by determining amount, position and type of the balance weights on the basis of rim dimensions saved in memory and imbalance data determined during measurement

​

Patented Automatic Power Clamp

Ensures consistent and constant wheel-clamping force- ensuring accurate balance on all wheels

​

Geodyna 7100

Motorized                         Yes

Wheel clamping               QuickNut

Diameter of shaft             40 mm

Measuring speed             < 100 rpm

Balancing accuracy         0.035 oz

Angular resolution           ± 0,35°

Length of shaft                225 mm

Rim diameter range        8″ – 32″

Offset range                    1″ – 20″

Rim width range              1″ – 20″

Max wheel diameter       37.8 inch

Max. wheel weight          154 lbs

Input power (VAC)          230 VAC 1Ph 50/60 Hz

Dimensions LxWxH        43.3″ x 39.6″ x 67.4″

Hofmann Geodyna 7100

The geodyna® 7100 offers space-saving usability, with belt-driven one-spin balance, the VPI measuring system, user-friendly 2D SAPE data entry and an intuitive control panel.

​

Part Number:  

EEWB761AE1

​

Small footprint

Semi-automatic input of offset and rim diameter via 2D SAPE

Manual input of rim width

Conspicuous and intuitive LED display

Imbalance minimization and optimization programs

VPI measurement technique for uncompromised accuracy

QuickBal for reduced measurement time:
Short start-stop cycle time: 6.5 seconds (15″ rim)

Measuring speed < 100 rpm

Wheel guard

Clamping of wheel on integrated flange with quick nut

Geodyna 7800 P

Motorized                         Yes

Wheel clamping               Power Clamp

Diameter of shaft             40 mm

Measuring speed             < 200 rpm

Balancing accuracy         0.035 oz

Angular resolution           ± 0,35°

Length of shaft                225 mm

Start/Stop balance time  4.5 s

Rim diameter range        8″ – 32″

Offset range                    1″ – 20″

Rim width range              1″ – 20″

Max wheel diameter       42 inch

Max. wheel weight          154 lbs

Input power (amperage) 1.1 A

Input power (VAC)           230 VAC 1Ph 50/60 Hz

Dimensions LxWxH        76.4″ x 40.2″ x 61.8″

Hofmann Geodyna 7800 P

The wheel balancer for garages, car dealerships, tire shops and premium workshops with high tire service volume. With touchscreen monitor, automatic non-contact data entry and easyWEIGHT™ pinpoint indicator light – An accurate, fast and easy solution to position adhesive weights on the wheel.

​

Part Number:  

EEWB753BE8

​

Productivity Enhancing Features

Automatic data entry and selction of balancing mode via scanner and Smart Sonar

Automatic spoke detection – automatically detects number and position of rim spokes

One-spin balance

VPM measurement technique for uncompromised accuracy

​

Intuitive, Ergonomic Design

Platinum touchscreen user interface – new resistive touch display with large icons for use with or without gloves on

Fast and intuitive selection of the cycle modes: fully automatic with spoke detection, fast automatic without spoke detection and manual mode

​

Patented ergonomic telescopic wheel guard reduces the overall equipment footprint

​

geodata 

The geodyna 7800p is equipped with the geodata arm, a unique and patented tool

​

VPM Measurement Technique 

The geodyna 7800p comes with the patented virtual plane measurement (VPM) technique which ensures accurate balancing results, while being insensitive to ambient conditions

​

easyWEIGHT 

Pinpoint indicator light – the accurate, fast and easy solution to position adhesive weight on the wheel

​

Power Clamp 

The electromechanical power clamp always clamps the wheel accurately and with a constant force

​

Additional Features

The patented Wheel Scanner detects wheel diameter and offset as well as the number and position of wheel spokes

The 225mm long shaft allows the use of accessories with every type of wheel

The operator only has to touch the amount of unbalance on the screen and the tire is automatically indexed to the correct position

​

Monty 3550

Clamping range                                12″ – 28″

Outside clamping range                   12″ – 26″

Inside clamping range                      12″ – 28″

Capability                                          70 kg

Power supply                                    115 VAC 1Ph 50/60 Hz

Dimensions LxWxH                          75.6″ x 67.7″ x 89″

Weight                                               975 lbs

​

Hofmann Monty 3550

Hofmann’s monty® 3550 series of high-performance tire changers feature the industry’s most advanced capabilities to service a wide variety of wheel and tire assemblies. The monty 3550 series is specifically designed to change low-profile, high performance and run-flat tires maximizing a shop’s versatility.

​

Part Number:  

EEWH747A

​​

Accommodates Large Wheel & Tire Assemblies 

Allowing for a tire diameter of 47″ and an outer-wheel diameter of 26″ on the monty 3550 (30″ on monty 3550em,) the monty 3550/3550em can handle wheel and tire assemblies found on cars and light trucks

Dual Wheel Clamping Cylinders 

Dual pneumatic clamping cylinders control all four clamping jaws, eliminating damage to wheel due to slippage

Four-Jaw Clamping Chuck 

Self-centering and clamps wheel with either 28″ inner or 26″ outer diameter

Powerful Two-Position Bead Breaker 

6,000 lbs of power at the bead shovel and a range of up to 17″ wide. The two-stage pneumatic cylinder provides precise power and can be toggled with the foot pedal as needed

Pneumatically-Controlled Mount/Demount Head 

Push-button controlled mount/demount head pneumatically lowers and locks into position, automatically indexing away from the wheel to prevent contact and damage to the wheel and tire assembly

Protect the Most Delicate Wheels 

All metal parts have plastic protection providing non-metal to metal contact when changing delicate wheels

​

Two-Speed Capability (EEWH747A) 

7 RPM for delicate and difficult activities, 14 RPM for speed

Monty 1625 SS

​

Outer-Clamping Diameter                10″-24″ (250 – 609.6 mm)

Inner-Clamping Diameter                 12″-24″ (304.8 – 609.6 mm)

Maximum Wheel Width                    15″ (380 mm)

Maximum Tire Diameter                   53″ (1,346 mm)

Compressed Air Supply                   110-170 PSI (7.6-11.7 BAR)

Adjustable Four Claw Clamp            Included

Integrated Bead-Seating Jets           Included

Pressure Timer                                 Included

Twin Cylinder Turntable Clamping    Included

Rotation Speed                                 CW 7-18 | CCW 7 RPM

Bead Breaker Power                         2,700 lbs (12 kN)

Bead Breaker Range                        1.7″ – 16.3″ (43-414 mm)

Recommended Floor Space             53.3″ x 46.1″ x 80.75″

Shipping Weight                                750 lbs (340 Kg)

Power Requirements                        230V 1Ph 50/60Hz 16A

​

Hofmann Monty 1625 SmartSpeed

Hofmann’s monty® 1625 Two-Speed tire changer is designed for high-volume tire shops, multi-bay repair shops and car dealerships. The monty 1625 series swing-arm tire changers feature 24″ outer-wheel clamping standard (28″ with optional adapters). The advantage of 14 RPM allows the technician faster throughput through the bay. These tire changers feature a four-jaw clamping chuck which is self-centering and clamps wheels with either a 26″ inner or 24″ outer diameter.

​

Part Number:  

EEWH748B

​​

Patented smartSpeed™ Technology

Automatically minimizes damage to tires

Innovative, patented technology that optimizes the torque applied to the wheel and automatically sets the maximum rotation speed of the wheel

Variable 7 RPM to 18 RPM offering the highest possible speed for maximum productivity

Accommodates Large Wheel & Tire Assemblies 

Allowing for a tire diameter of 50″ on the monty 1625 (42″ on monty 1625em), and outer-wheel diameters of 24″. The monty 1625/1625em can handle wheel and tire assemblies found on cars and light trucks

Dual Wheel Clamping Cylinders 

Dual pneumatic clamping cylinders control all four clamping jaws, eliminating damage to wheels due to slippage

Four-Jaw Clamping Chuck 

Self-centering and clamps wheels with either 26″ inner or 24″ outer diameter

Multi-Position Bead Breaker 

6,000 lbs of power at the bead shovel and a range of up to 18″ wide. The two-stage pneumatic cylinder provides precise power and can be toggled with the foot pedal as needed

Powerful Tire Inflation System 

Powerful air blast operated by the foot pedal. Each movable jaw is precisely set to the exact position under the wheel to seal the tire bead

Built To Last 

Heavy, solid 1/2″ thick steel clamping table. Rugged steel-reinforced chassis. Rust-proof air cylinders and valves. Compressed air lubricator and regulator on-board

Monty 1675 SS

​

Outer-Clamping Diameter                10″-24″ (250 – 609.6 mm)

Inner-Clamping Diameter                 12″-24″ (304.8 – 609.6 mm)

Maximum Wheel Width                    15″ (380 mm)

Maximum Tire Diameter                   53″ (1,346 mm)

Compressed Air Supply                   110-170 PSI (7.6-11.7 BAR)

Adjustable Four Claw Clamp            Included

Integrated Bead-Seating Jets           Included

Pressure Timer                                 Included

Twin Cylinder Turntable Clamping    Included

Rotation Speed                                CW 7-18 | CCW 7 RPM

Bead Breaker Power                        2,700 lbs (12 kN)

Bead Breaker Range                        1.7″ – 16.3″ (43-414 mm)

Recommended Floor Space             53.3″ x 46.1″ x 80.75″

Shipping Weight                               750 lbs (340 Kg)

Power Requirements                        230V 1Ph 50/60Hz 16A

​

Hofmann Monty 1675 SmartSpeed

The Hofmann® 1675 tire changing system is ideal for handling passenger cars, light trucks and high-performance wheel/tire assemblies. Ergonomic design and safety enhancing features provide the technician a safe workspace when changing a variety of tires. Locking mount/demount head offset provides maximum cosmetic safety for expensive wheels and significantly reduces the risk of harming wheel/tire assemblies.

​

Part Number:  

EEWH779CU1

​​

Robust, Professional Design

Precision cast and machined shoes with robust cast jaws make for precise, slop free clamping

Heavy-duty pneumatic valves are simple to operate and offer intuitive functionality

Powerful electric motor generates 1200Nm of torque to the table top to mount stiff, difficult tires

​​

smartSpeed™ Model

Automatically minimizes damage to tires

Innovative, patented technology that optimizes the torque applied to the wheel and automatically sets the maximum rotation speed of the wheel

Variable from 7 to 18 RPM; offering the highest possible speed for maximum productivity

Ergonomic, Hand Operated Bead Breaker Control

Newly designed bead breaker is easy to use and prevents the technician from having to straddle the assembly during bead breaking

Integrated Pressure Limiter

Stops air flow once pressure has reached 55 PSI (3.5 Bar) preventing accidental tire over-inflation

Mount/Demount Head

Locking of the mount/demount head offset, which provides maximum cosmetic safety for expensive wheels and significantly reduces the risk of harming wheel/tire assemblies

Tire Lifting Tool

Integrated bead pusher assists in the mount/demount process of the upper bead. Tire lifting tool aids the technician with the demounting process

Swing-Arm Configuration

Quick and easy setup. Stays within a compact footprint, even with larger tire sizes. Provides an ergonomic tire changing position